The Defense Systems Information Analysis Center received a technical inquiry on protecting crews from gun tube rupture. In particular, there is a possibility that a 120-mm mortar tube could rupture due to inclusions present in the microstructure of the steel used to construct the gun tube. This rupture would release a high-temperature gas flow at 19,000 psi if the failure is a ductile fracture. If the failure is a brittle fracture, pieces of steel would also be released. The inquiring organization is looking for possible solutions to protect the crew in case of this event, without limiting the weapon’s usage. Materials engineering and ballistician subject matter experts at the Texas Research Institute Austin, Inc., performed literature searches using the Defense Technical Information Center, open sources, and university libraries to identify related work and provided information on potential complementary technologies.
1.0 Introduction
There is little information on this in the available literature. Most solutions that would provide true protection against either a ductile failure (gas escape) or brittle failure (gas escape with shrapnel) involve systems that would severely restrict the gun’s usage (additional layers of steel to provide more protection, similarly to the laminated structure of large-caliber weapons, or other steel tubes surrounding the barrel acting as a shield but not in direct contact with the barrel).
Several publicly available patents were identified [1–5]. Of these, U.S. Patent 9,863,732 [4] seems to provide the most relevant solution. Additionally, U.S. Patent 7,963,202 [5] has a long list of prior art relevant to this topic.
2.0 New Technologies
Development of new materials and methods seem to be ongoing, even though the basic idea is the same as weapons used late in World War I. Mortar tubes made solely from steel are viable candidates for replacement with modern materials, although this can be a challenge given procurement procedures.
Developing composite overwrapped pressure vessels using carbon fiber reinforced polymer, the same material class used to construct modern airframes, offers a means to retrofit existing gun tubes. This is alluded to in U.S. Patent 9,863,732 (see Figures 1 and 2 for examples).
Figure 1: Composite Overwrapped 120-mm Gun Tube Images [4] (Source: Google Patents).
Figure 2: A Casing From an Altair Rocket Stage, Essentially a Composite Overwrapped Pressure Vessel (Source: Smithsonian National Air and Space Museum).
A U.S. Army report describes trying to shift to titanium (Ti) alloys [6–8] to leverage the lightweight nature of the material but specifically states that a suitable momentum trap needs to be devised before this would be possible (as well as mitigating internal damage due to erosion). This report also mentions developing a metal matrix composite as a jacketing material but mentioned how no data were available on fatigue, thermal fatigue, and high‑temperature fatigue (no reference to this program was provided). In addition, other work discussed the possibility that the steel projectile may gall the Ti barrel during firing [9]. The report discusses switching materials to an Ni 718 alloy to gain resistant against failure at high temperatures. This does provide a way past dealing with inclusions in steel but will require methods to address different types of inclusions that appear in Ni-based superalloys (also note that Ni-based superalloys are slightly heavier than steel alloys).
Another possible avenue is nondestructive inspection/evaluation (NDI/E) of the barrels during maintenance intervals for the mortars. Beginning in 2014, U.S. Army Watervliet Arsenal, NY, has invested $26M in upgrades that included a pair of ultrasonic immersion tanks for inspecting newly fabricated mortar tubes of various calibers [10]. However, these are done post‑manufacture and not as part of any regular maintenance. The U.S. Air Force routinely performs maintenance on different parts of different aircraft depending on the specific usage and part of the structure. A system similar to this may provide the safety increase that the Army desires but in another way. From a technology transfer perspective, many NDI/E techniques from the oil and gas industry may be utilized for rapid, in-field gun tube inspections. The oil and gas industry have to constantly inspect pipelines (composed of steel and, in some cases, composite). A number of existing ultrasonic, eddy current, and magnetic flux linkage (MFL) solutions may already exist for this problem (both sensors, arrays, and crawlers [for external inspections]) and pigs [for internal inspections, a process known as pigging]).
Following the technology that the U.S. Army uses for enhanced small arms protection insert body armor, it may be possible to layer ultrahigh molecular weight polyethylene layers on the outside of the barrel (depending on heating constraints). A “lower tech” version of this may also be available via using sandbags (or a modified variant thereof). Both these methods can provide some protection in a dynamic impact scenario, but it is unknown if the same degree of protection would be conferred for a material directly layered onto the steel barrel (where the damage would occur similarly to a spallation event, with the shock passing through the different material layers and thusly attenuated).
References
[1] Varlas, M. “Method of Making High Modulus Graphite Fiber Reinforced Tubes.” U.S. Patent 3,879,244, U.S. Air Force, https://patents.google.com/patent/US3879244A/en?oq=U.S.+ Patent+3.879%2c244, 22 April 1975.
[2] Briggs, V. R. “Composite Firearm Barrel Reinforcement.” U.S. Patent 7,921,590, Sturm Ruger and Co Inc., https://patents.google.com/patent/US7921590B2/en?oq=U.S.+Patent+ 7%2c921%2c590, 12 April 2011.
[3] Mulligan, C. P., A. Littlefield, and J. Root. “Multi-layered Mortar Tube.” U.S. Patent 9,939,222, U.S. Secretary of Army, https://patents.google.com/patent/US9939222B1/en?oq= U.S.+Patent+9%2c939%2c222, 10 April 2018.
[4] Curliss, D. B., and J. E. Lincoln. “Lightweight Composite Mortar Tube.” U.S. Patent 9,863,732, Proof Research, Inc., https://patents.google.com/patent/US9863732B2/en?oq=+
U.S.+ Patent+9%2c863%2c732, 15 September 2016.
[5] Becker, R. F., M. D. Witherell, J. Santiago, G. E. Hathaway, IV, R. Espinosa, and S. Tauscher. “Superalloy Mortar Tube.” U.S. Patent 7,963,202, U.S. Secretary of Army, https://patents.
google. com/patent/US7963202B1/en, 21 June 2011.
[6] Burke, J. J. “Historical Monograph: Ordnance Corps Titanium Program 1946-61.” Watertown Arsenal Monograph MS-39, Watertown, MA, 1962.
[7] Montgomery, R. S. “Wear of Titanium Alloy in Mortar Tubes and Effect of Anodizing (Declassified).” Watervliet Arsenal Technical Report WVT-7013, Watervliet, NY, 1 June 1970.
[8] Fonte, M. “Flowforming Mortar Cannon Barrels.” Advanced Materials & Processes, vol. 166, no. 5, https://www.asminternational.org/news/magazines/-/journal_content/56/10192/AMP16605P047/PERIODICAL-ARTICLE, 1 May 2008.
[9] Montgomery, J. S., and R. L. Ellis. “Large Caliber Gun Tube Materials Systems Design.” 10th U.S. Army Gun Dynamics Symposium Proceedings, Austin, TX, Distribution A, DTIC Accession Number: ADP012479, https://apps.dtic.mil/sti/
pdfs/ADP012479.pdf, 23–26 April 2001.
[10] Snyder, J. B. “Army Manufacturer Seeks to Raise its Quality, Confidence of Infantrymen.” U.S. Army Watervliet Arsenal Public Affairs, https://www.army.mil/article/122279/army_manufacturer_seeks_to_raise_its_quality_confidence_of_infantrymen, 1 April 2014.